I changed the lights on the xB & Camry at the same time. I'm not 100% satisfied, but it looks 100x better. The xB has a tinted license plate cover, so the light doesn't show very well. I'll be removing that when I replace the black frame w/ a chrome one. The Camry looks a lot better & since the car is white and there's no cover on the plate it looks a lot better. Unfortunately, the lights are a little too focused. They provide enough light, but the beams don't evenly cover the plate. The color is perfect though.

I think I got these LEDs from hid-lights.com, but I also get LEDs from superbrightleds.com and autolumination.com

Does it have the lenses on? Those are bright!

Thanks xserved. For 10$ I will give those a shot. If anyone has any other pics or ideas lets hear em.

www.superbrightleds.com has a gaggle of 194 LED's, too.  May as well check them out, too.  I know Lex's melted in the headlights of his tC, but those are known to melt because they get extremely hot.  Hell, I burnt my finger on a 194 bulb (non LED) that was on for maybe 20seconds.   

Pulling the panel off isn't difficult at all, either.  All I did was stuck a flat head screwdriver in the slot on the passenger side towards the bottom.  I made sure to wrap the screwdriver with some electrical tape so I didn't scratch anything.  Most of the panel clips will more than likely stay in the metal, so just use some needle nose pliers and pull them out.  Be a little on the careful side pulling the clips out.  You don't want to have to go to the dealer to get new ones! 

Well I installed my bulbs from garage1217 and they looked great. Took a drive over to show a friend and one had already failed. I will email garage1217 and see what they say but that is pretty lame so beware.

Same side. I was so disappointed. Have not heard from Garage 1217 yet. I think I might swap the bulbs and see if it kills the other one.