I don't have pics of the installation, but here are a couple of threads that might help:

http://newscionxb.com/audio_electronics/addacircuit-t574.0.html

http://newscionxb.com/member_pics/my_nautical_blue_xb-t33.0.html;msg3936#msg3936

The first thread covers where to get power from if you want constant power from the fuse panel, controlled by a switch. The second thread covers where to run wires and ground.

Depending on if you want a lighted switch or not, you will run two or three wires to it, the difference being a lighted switch needs to be grounded. So you'll have power running to one terminal on the switch, then from the other terminal to the lights. The lights will need to be grounded off the other lead.

What is cool also. Is you can relocate your traction control switch over next to the shifter and then have 3 blank spots all by themselfs over on the left hand side of the steering wheel. If you look at this pic you can see that I moved the traction control switch over there. See if you can figure out what else is different in the pic. LOL

YOU ROCK AVON LADY JENN!

Where do you order those, may I ask? I was thinking about trying to find a turquoise for mine. 

Back on this...does anyone have a DIY for installing a switch?  I need to add 2.  One for exterior Red lights and one for blue interior.  Thinking of putting the blue next to the shifter and the red over by the traction control.

Jeremy, didn't figure it out yet.  Had a friend do the LED's for the outside, but I have to have the key on to make them work and would prefer not to have to use the key.  Still have to do the interior blue lights on a switch so if you have a DIY I would so appreciate it.  Like you I would prefer them to work without the key....so not sure what we did wrong on the exterior switch.  And we have to do the interior switch next